Barden fag angular contact bearings have one ring shoulder partially or totally removed.
T
his allows a larger ball complement than found in comparable deep groove
bearings, hence a greater load capacity. Speed capability is
also greater.
Barden fag angular contact bearings are assembled to a contact angle by varying the
radial clearance.
Instrument angular contact bearings have nominal contact angles of either 10° or 15°.
Barden fag bears are separable and nonseparable. In a separable bearing (B type), the cage holds the
balls in place so that the outer ring assembly (with cage and balls) can be separated from the inner ring.
Barden fag separable bearings are useful where bearings must be installed in blind holes
or where press fits are
required, both on the shaft and in the housing. The
separable feature also permits dynamic balancing of a rotating
component with
inner ring mounted in place, apart from the outer ring and housing.
Barden fag angular contact bearings support thrust loads or combinations of radial and
thrust loading. Barden fag
bearings cannot accept radial loads only — a thrust load of
sufficient magnitude must be present. An individual
Barden fag angular contact bearing can
be thrust-loaded in only one direction; this load may be a working load or
a preload.
Ball Bearings